Vince, N6OA, is generously providing WIRES-X support for the 70-cm machine. WIRES-X access is digital-only. The repeater will still pass analog traffic, so those of you with analog rigs, please check the S-meter before transmitting. Also, because the duty-cycle has become rather high, the output power of the 70-cm machine as been reduced to 25W. This will allow a 100% duty-cycle without power drops.
On the 2-meter side, the new amp is in place. A bit about the new amp is in order.
It is fairly common knowledge that YSF repeaters are unable to maintain 100% duty cycle at full power. They start out at 50 watts, but as they heat up, the power is reduced to 25W. We see this when folks from St. Augustine, for instance, join our net, check in, but as the net goes on they stop hearing us.
We now have a Henry Radio C130AB10R amplifier doing the heavy lifting. Our DR-1X now puts out 5 watts, well within it’s capability. The amplifier is a 10dB system which, while capable of 100W, is only asked to provide 50. The hope, is that through not running anything full-on, we can extend the life of the entire system and have a more consistent operating experience.
This link goes to a FEMA page that contains downloadable, fillable pdf forms. At the bottom is a link to the ICS Forms Booklet which contains the complete collection of forms.
Remember we are particularly interested in
The next Palatka Amateur Radio Club meeting will be held on June 16, 2020. We are meeting in the First Baptist Church cafeteria. The entrance is in the side-building (where we used to meet) next to the church. The door will be locked at 19:05. If you arrive after that, call on 146.52 and somebody will let you in.
Upcoming Club Meetings
|December 15 (tentative)
Here are the links from the U.S.N.G. presentation from the April 18th meeting. Each will open up in a new window.
[NB] Google changed the terms of their Map API so that it started costing folks a lot more to use it. As a result GMap4 site which we had previously pointed to shut down for free use. KF4SYZ graciously located another site that provides similar information and I have replaced the link below.
Once you are on the Mission Manager site, there will be a ‘Coords:’ dropdown where you should select ‘USNG’. At the top, make sure the ‘Grid’ checkbox is selected. From that point, you can zoom in up to a 100m grid. The pointer can provide 1m coordinates.
Convert Lat/Lon to USNG
Mission Manager mapping site.
Florida Incident Mapper
If you look in the upper right, there is a link to sign up for the announce mailing list. Anybody can sign up. This list is for upcoming club meeting, events, etc. This list is send-only. To reduce the possibility of spam, all replies go to trash.
We now have an official website! It will take a few days (weeks?(months?)) to get thing up and going so please bear with us.
Please send any content, updates, or corrections to either K1RBY or KF4SYZ.